IBC Accessories

Everything you need to outfit, maintain, and optimize your IBC totes. Valves, adapters, gaskets, lids, heating solutions, spill containment, and more.

Keep Your IBCs Running at Peak Performance

An IBC tote is only as good as its fittings. A worn gasket causes leaks. A corroded valve stalls your production line. A missing dust cap allows contamination. At Salt Lake IBC, we carry a full line of replacement parts and upgrade accessories to keep your containers functioning safely and efficiently.

All of our accessories are compatible with standard composite IBCs from major manufacturers including Schütz, Mauser, Greif, and others. We stock common parts for immediate pickup at our Woods Cross facility and can special-order hard-to-find components with typical lead times of 3-7 business days.

Accessory Compatibility Matrix

Quickly verify which accessories work with your IBC configuration. This matrix covers the most common IBC brands and models we encounter.

Accessory	Schütz	Mauser	Greif	Thread Standard
2" Butterfly Valve	Yes	Yes	Yes	S60x6 or NPS 2"
2" Ball Valve (PP)	Yes	Yes	Yes	S60x6 or NPS 2"
2" Ball Valve (SS)	Yes	Yes	Yes	NPS 2"
6" Screw Cap	Yes	Yes	Yes	DN150 buttress
8" Screw Cap	Check model	Check model	Check model	DN225 buttress
EPDM Valve Gasket	Yes	Yes	Yes	Universal 2"
EPDM Lid Gasket (6")	Yes	Yes	Yes	DN150
Cam Lock Adapter	Yes	Yes	Yes	S60x6 to cam lock
Garden Hose Adapter	Yes	Yes	Yes	S60x6 to 3/4" GHT
Heating Blanket	Yes	Yes	Yes	Universal fit
Insulation Jacket	Yes	Yes	Yes	Universal fit
Single Spill Pallet	Yes	Yes	Yes	48" x 48" standard

Valves & Dispensing

The valve is the most frequently replaced component on an IBC. We carry all standard types in food-grade polypropylene and stainless steel.

Butterfly Valves

2" (50mm) standard size, fits all composite IBCs
Polypropylene body with EPDM seals
Quarter-turn operation for quick open/close
Best for: water, thin liquids, cleaning solutions
Flow rate: ~40 GPM at full open
Temperature range: 14°F to 176°F

The most common IBC valve. Included standard on most new and reconditioned totes. Affordable and easy to replace.

Ball Valves

2" (50mm) full-bore design, NPS thread
Polypropylene or stainless steel body
PTFE seats for chemical compatibility
Best for: viscous liquids, oils, syrups, thick chemicals
Flow rate: ~50 GPM (larger bore than butterfly)
Temperature range: -4°F to 250°F (SS)

Preferred when higher flow rates or chemical resistance is needed. Better for thick/viscous products that can clog butterfly valves.

Cam Lock Fittings

Type A, B, C, D, E, and F available
2" standard, 1.5" and 3" by request
Polypropylene, aluminum, or stainless steel
Quick-connect/disconnect without tools
Best for: hose connections, pump hookups, transfer lines
Gaskets: Buna-N, EPDM, or PTFE

The fastest way to connect and disconnect hoses to your IBC. Essential for operations that fill or drain IBCs frequently.

Spigots & Taps

Threaded to fit standard 2" IBC outlets
Polypropylene with lever handle
Gravity-fed dispensing for low-flow use
Best for: hand washing, garden watering, small fills
Available with hose barb adapters
Food-grade materials available

Simple, affordable solution for gravity dispensing. Popular with garden, farm, and homestead IBC users.

Valve Adapters

S60x6 to NPS 2" thread adapters
S60x6 to garden hose (3/4" GHT)
NPS 2" to 1" reducer fittings
Tri-clamp to NPS adapters
Polypropylene or stainless steel
Custom adapters available by request

Essential for connecting IBCs to existing plumbing, hoses, pumps, and equipment with different thread standards.

Dust Caps & Plugs

2" (50mm) threaded dust caps
Polypropylene with EPDM O-ring
Protects valve outlet during storage/transport
Prevents contamination and insect entry
Reusable, UV-resistant material
Available in packs of 10 or 25

A small but critical accessory. Every IBC in storage or transit should have a dust cap on the outlet to prevent contamination.

Valve & Fitting Technical Specs

Detailed specifications for our most popular valve and fitting products. Use these specs to verify compatibility with your system before ordering.

Product	Material	Size / Thread	Temp Range	Pressure Rating	Gasket
Butterfly Valve	Polypropylene	2" / S60x6	14-176°F	15 PSI	EPDM
Ball Valve (PP)	Polypropylene	2" / NPS 2"	14-200°F	50 PSI	PTFE seats
Ball Valve (SS)	304 Stainless	2" / NPS 2"	-4-250°F	150 PSI	PTFE seats
Cam Lock Type C	PP / AL / SS	2" / Cam groove	14-200°F	50 PSI	Buna-N/EPDM
Garden Hose Adapter	Polypropylene	S60x6 to 3/4" GHT	14-140°F	15 PSI	EPDM O-ring
Spigot / Tap	Polypropylene	2" / S60x6	14-140°F	Gravity only	EPDM
6" Screw Cap	Polypropylene	DN150 buttress	14-200°F	N/A	EPDM
Breather Vent	Polypropylene	DN150 thread	14-176°F	0.5 PSI cracking	EPDM

Lids, Caps & Gaskets

A proper seal starts at the top. We carry replacement lids and gaskets for all standard IBC configurations.

6" Screw Caps

Standard 150mm screw caps in polypropylene. Fits most 275-gallon and 330-gallon IBCs. Includes EPDM gasket for leak-proof seal. Thread pattern: coarse buttress thread.

8" Screw Caps

Larger 225mm opening caps for wide-mouth IBCs. Used for products requiring wider fill access or pour-in loading. Same thread style as 6" but larger diameter.

Lid Gaskets

Replacement EPDM gaskets for 6" and 8" IBC lids. These gaskets wear over time and should be replaced if you notice any leakage around the lid seal. Sold individually or in packs of 10.

Valve Gaskets

Replacement EPDM and PTFE gaskets for butterfly and ball valves. The most common wear item on an IBC. We replace these on every reconditioned unit and recommend annual replacement for active IBCs.

Installation Guides

Step-by-step instructions for the most common IBC accessory installations. Most of these can be done in minutes with basic tools.

Replacing a Butterfly Valve

Easy5-10 minutesTools: No tools required (hand-tight)

1Ensure the IBC is empty or the valve is closed and a catch container is placed below.
2Unscrew the existing valve by turning counterclockwise. The S60x6 thread will release after several full turns.
3Remove the old gasket from the valve seat on the IBC bottle neck. Clean the threads and seat area.
4Place the new EPDM gasket on the new valve (pre-installed on most replacement valves).
5Thread the new valve into the bottle neck by turning clockwise. Hand-tighten firmly. Do not use tools or over-torque.
6Test by filling the IBC with a small amount of water and checking for drips. Re-tighten if needed.

Installing a Cam Lock Adapter

Easy5 minutesTools: No tools required

1Remove the existing valve or dust cap from the IBC outlet.
2Thread the cam lock adapter onto the IBC outlet. Most adapters have S60x6 female threads on one end.
3Hand-tighten firmly. Wrap threads with PTFE tape first if you want extra leak protection.
4Attach your cam lock hose coupling to the adapter. Pull the cam arms into the locked position.
5Test the connection under pressure by opening the IBC valve (if upstream) and checking for leaks at all joints.

Replacing a Lid Gasket

Easy2-5 minutesTools: Flathead screwdriver (optional, to pry old gasket)

1Unscrew the IBC lid completely and set aside.
2Locate the gasket in the groove on the underside of the lid. Peel or pry it out. Old gaskets may be stuck.
3Clean the gasket groove with a damp cloth. Remove any debris or residue.
4Press the new gasket into the groove, ensuring it seats evenly all the way around without twists or gaps.
5Replace the lid on the IBC and tighten to hand-tight plus a quarter turn. The gasket should compress evenly.
6Fill with a small amount of water and tip the IBC slightly to check for lid seal integrity.

Setting Up a Heating Blanket

Moderate15-20 minutesTools: None (blanket wraps around IBC inside cage)

1Ensure the IBC is on a flat, stable surface. The heating blanket installs inside the steel cage, wrapping around the HDPE bottle.
2Open the cage latches on one side of the IBC to create access to the bottle surface.
3Drape the heating blanket around the bottle, positioning it so the heating elements cover as much surface area as possible.
4Secure the blanket using the built-in straps or Velcro closures. The blanket should be snug but not compressing the bottle excessively.
5Route the power cord through the cage opening and close the cage latches.
6Connect to an appropriate power source (120V or 240V depending on model). Set the thermostat to your desired temperature.
7Allow 4-8 hours for the blanket to bring the full IBC contents to temperature. Monitor with a thermometer initially.

Heating & Insulation

Utah winters can be brutal on liquid products stored outdoors. Our heating blankets and insulation jackets protect your IBCs from freezing and keep viscous products flowing.

IBC Heating Blankets

Electric heating blankets wrap around the IBC bottle inside the cage frame, providing uniform heat distribution to prevent freezing or maintain optimal viscosity for dispensing. They are the most effective solution for cold-weather IBC storage and are essential for any Utah business storing liquids outdoors between November and March.

Available in 120V and 240V configurations
Adjustable thermostat (40°F to 160°F)
Full-wrap design covers all four sides of the bottle
Rated for outdoor use with weather-resistant connectors
Power consumption: 1,400-2,000 watts depending on model
UL listed and CSA certified
Compatible with 275-gallon and 330-gallon IBCs

Insulation Jackets

Insulation jackets are passive thermal barriers that slow heat loss (or gain) from your IBC contents. They're ideal for maintaining temperature without the ongoing energy cost of a heating blanket, or as a complement to a blanket for maximum efficiency.

Multi-layer construction: outer weather shell + insulation core
R-value: approximately R-5 to R-8 depending on model
Full-coverage design wraps top, sides, and bottom
Zippered access to valve and lid for operation without removal
UV-resistant outer shell for extended outdoor use
Reusable across multiple IBCs, machine washable cover
Available for 275-gallon and 330-gallon IBCs

Accessory Bundle Deals

Save money by purchasing commonly-needed accessories together. Our bundles are pre-assembled and priced below the cost of buying each item separately.

Save 15%

Valve Refresh Kit

1x Replacement butterfly valve
2x EPDM valve gaskets
1x EPDM lid gasket
1x Dust cap
1x Roll PTFE tape

Ideal for: Annual maintenance for a single IBC. Replaces all wear items in one kit.

Save 10%

Garden Hookup Kit

1x Garden hose adapter (S60x6 to 3/4" GHT)
1x Spigot with lever handle
1x Y-splitter for dual hose
2x Hose clamps
1x Dust cap

Ideal for: Everything you need to connect your IBC to standard garden hoses for watering and irrigation.

Save 20%

Winter Protection Bundle

1x IBC heating blanket (120V)
1x Insulation jacket
1x Insulated lid cover
1x Valve insulation wrap

Ideal for: Complete freeze protection for one outdoor IBC. Essential for Utah winters.

Save 12%

Pump Connection Kit

1x 2" cam lock adapter (Type C)
1x 2" cam lock hose barb
2x Cam lock gaskets (EPDM)
1x Check valve (prevents backflow)
1x Breather vent

Ideal for: Everything to connect a pump to your IBC for pressurized dispensing with backflow protection.

Save 10%

Spill Compliance Kit

1x Single IBC spill pallet
1x Drip tray for valve area
1x Universal spill kit (10 gal)
2x Absorbent socks (3 ft each)
1x Disposal bag

Ideal for: Meet EPA 40 CFR secondary containment requirements. Covers one IBC station.

Save 25%

Multi-IBC Maintenance Pack

10x EPDM valve gaskets
10x EPDM lid gaskets
5x Dust caps
2x Rolls PTFE tape
1x Cage repair clamp set

Ideal for: Bulk maintenance supplies for operations running 10+ IBCs. One-year supply for most facilities.

Maintenance Schedule

Follow this recommended maintenance schedule to maximize the lifespan and reliability of your IBC accessories.

Component	Inspection Frequency	Replacement Interval	Signs of Wear
Valve Gasket	Every fill cycle	Annually or if dripping	Dripping at valve stem, compression set, hardening
Lid Gasket	Every fill cycle	Annually or if leaking	Lid seal weeping, gasket flattened, cracks visible
Butterfly Valve	Monthly	Every 2-3 years	Stiff operation, corrosion, disc no longer seals
Ball Valve	Monthly	Every 3-5 years	Handle play, seat leakage, stem corrosion
Cam Lock Gasket	Every connection	Every 6-12 months	Connection drips, gasket torn or deformed
Dust Cap O-ring	Every removal	Annually	O-ring stretched, cracked, or missing
Heating Blanket	Monthly (in season)	Every 5-7 years	Thermostat malfunction, hot spots, cord damage
Insulation Jacket	Seasonally	Every 3-5 years	Torn outer shell, waterlogged insulation, UV fade
Spill Pallet	Quarterly	Every 10-15 years	Cracks in sump, UV degradation, drain plug failure

Spill Containment & Safety

EPA regulations (40 CFR 264.175) require secondary containment for stored liquids in many applications. Our containment products keep you compliant and protected.

Single IBC Spill Pallets

HDPE spill containment pallets sized for one IBC tote. 275-gallon sump capacity meets EPA 110% containment requirements. Four-way forklift entry, integrated drain plug, and removable grate for cleaning. UV-stabilized for outdoor use.

Double IBC Spill Pallets

Side-by-side containment for two IBCs. 550-gallon combined sump capacity. Same construction and compliance as the single unit but with a wider footprint. Ideal for paired storage operations.

Quad IBC Spill Pallets

Four-unit containment platform for high-density IBC storage. 1,100-gallon sump capacity. Modular design allows units to be connected for larger configurations. Meets SPCC plan requirements.

IBC Containment Berms

Flexible, portable secondary containment for temporary or field use. Folds flat for transport, pops up in minutes. Available in custom sizes. Ideal for construction sites, agricultural fields, and emergency response.

Drip Trays & Funnels

Smaller containment solutions for catching drips at the valve outlet during dispensing. Prevents floor contamination and slip hazards. Available in various sizes from 2-gallon to 15-gallon capacity.

Spill Kits

Complete spill response kits sized for IBC operations. Contains absorbent pads, socks, pillows, disposal bags, and PPE. Available in oil-only, chemical, and universal absorbent types.

Additional Fittings & Hardware

All the small parts that keep your IBC system running smoothly.

Hose Barb Adapters

Connect IBCs to standard hoses. Available in 3/4", 1", 1.5", and 2" sizes.

Thread Seal Tape

PTFE tape for sealing threaded connections. Food-grade available.

Y-Splitters

Divide one IBC outlet into two hose connections for dual dispensing.

Check Valves

Prevent backflow into the IBC. Essential for pump-fed systems.

Float Valves

Auto-shutoff valves for overflow prevention. Adjustable trigger level.

Breather Vents

Allow air exchange during dispensing to prevent vacuum lock.

Cage Repair Clamps

Steel clamps for repairing broken cage welds in the field.

Label Holders

Clip-on label holders for IBC cages. Fits standard 4"x6" labels.

Replacement Part Availability

We maintain a comprehensive inventory of the most commonly needed IBC replacement parts at our Woods Cross facility. Valves, gaskets, lids, dust caps, and adapters are available for same-day pickup or next-day delivery. If we do not stock a specific part, we can special-order it with typical lead times of 3-7 business days.

For businesses running large IBC fleets, we offer consignment inventory programs where we keep a stock of your most-used parts at our facility, pre-allocated to your account. This guarantees instant availability when you need a replacement, without tying up your capital in inventory you may not use for months.

We also offer emergency after-hours parts service for critical situations. If a valve failure or leak is causing a shutdown or spill risk, contact us and we will do our best to get you the part you need as quickly as possible, including same-day delivery within the Wasatch Front.

200+

Accessory SKUs In Stock

Same Day

Pickup Available

3-7 Days

Special Order Lead Time

24/7

Emergency Parts Service

Need a Part You Don't See Listed?

We stock the most popular IBC accessories at our Woods Cross facility and can special-order virtually any IBC part or fitting. Tell us what you need and we'll source it for you.